• Sets End1 equal to End2.

• Sets blade size by solving: Blade Depth=Body Depth/No. Of Blades

• Sizes device by solving equations: Body Width=W1+<first numeric value> and Body Depth=D1+<second numeric value>

• Confines the device to have equal size connections at each end.

• 1-Yes
• 2-No

• Sets box depth independent of End1 and End2. Limited by Auto Size property.

• Sets diameter of body of fan.

• Sets top box height from the base.

• Sets diameter of the fan body, usually the distance between End1 and End2.

• Sets height of the fan body.

• Sets box width independent of End1 and End2. Limited by Auto Size property.

• Sets depth of the box along the opening of the fittings like roof fan.

• Sets length of the box of the fittings like roof fan.

• Sets width of the box of fan.

  By default, applies W1 value.

• Library file name for device cells.

• Sets the model cell to the device.

• Sets diameter of center body of fan, usually half that of diameter of side bodies.

• Sets length of center body of fan connected between side bodies both sides.

• Sets height from center of Ends of fan to base. Proportional with Body dimension. Disabled when Base is set to No.

• Sets straight length at End1.
• Sets connection length at End1.

• Sets straight length at End2.
• Sets connection length at End2.

Connection | End Type

• Sets and sizes end with a flange connection.

• Sets and sizes end with a male connection.

• Sets and sizes end with a female connection.

Example: fl-2;fe-.13 creates a flange at End1 with size 2, and a female connection at End2 with an overall reduction of component's dimensions of .13

• Sets radius of fan housing.

• Sets rotation angle to outlet (e.g. 90° keeps fan housing exhaust upward).

• Sets height of the front body of the fitting, less than Body Height.

• Sets the outside diameter of the grille portion.

• Sets the gap between the grilles of roof fan.

• Sets the thickness of the grille box frame/grille surface

• Sets length of fan including motor casing in top cylinder. This also include Motor body and the Propeller space.

• Sets length of motor body unit of fan.

• Sets width of motor body unit of fan.

Motor | Diameter

• Sets diameter of motor/motor casing.

Motor | Housing Height

• Sets the dimension of the sides of motor housing. Motor Housing Height follows with the Stand Length.

• Sets the overall length of motor assembly.

• 1–Inside
• 2–Outside

• Sets either of sides for positioning motor in the fan.

• Sets the horizontal offset distance from the End1 and the motor assembly mounted on the body.

• Sets the lateral offset distance the motor assembly is mounted along the width on the body.

• Sets the outward length of outlet at connection End2.

• Sets the width of outlet at connection End2.

• Sets the gap formed between motor body and top cylinder of fan placed one over other.

• Sets diameter of side bodies of fan, usually follows End1 diameter.

• Sets length of side bodies connected at both sides of center body of fan.

• Sets height of the stand attached to fan body, effect on Motor Housing Height.

• 1–leftHanded
• 2–rightHanded

• Sets the suction (End1) orientation to right or left side. Motor housing is oriented to the opposite side on the Fan.

• Sets the dimension of vertical side of fan terminal back.

• Sets the dimension of horizontal side of fan terminal back.

• Sets the dimension of vertical side of fan terminal.

• Sets the distance from opening to fan terminal.

• Sets the dimension of horizontal side of fan terminal.

• Sets length of the top body of the fitting.

• Sets width of the top body of the fitting.

• Sets outer diameter of top cylinder assembly of upblast fan.

• Sets overall length of the fan units.

  In case of Roof Upblast fan, it totals the Motor Body length, height of top cylinder and the propeller space in between.

• Sets the fan operation manual, without the motor.

• Sets the fan in auto.